A detective in the Corrie McKeague case was "highly suspicious" after a device used to record bin weights was reset the day before police collected it, an inquest heard.

Mr McKeague, who was based at RAF Honington, was 23 when he disappeared in the early hours of September 24, 2016 after a night out in Bury St Edmunds.

He was last seen on CCTV at 3.25am entering a service area behind a Greggs where police believe he climbed into a bin, which was then tipped into a waste lorry.

Waste firm Biffa initially told police that the weight of the bin was 11kg (1 stone 10lbs) but it was later recorded as 116kg (18 stone 3lbs).

Detective Constable Richard Morgan told an inquest in Ipswich that an electronic device, kept in the cab of the bin lorry and used by the driver to weigh bins, was returned to factory settings the day before it was collected by police, on February 1, 2017.

Data from the device is downloaded to the database of waste firm Biffa after a lorry completes its rounds.

Lawyer Dr Anton van Dellen, asking questions on behalf of Mr McKeague’s father Martin McKeague, said: “Concentrating on that wiping of the (device), as a detective constable in a major investigation team, you’re going round collecting evidence for an investigation.

“You’ve found that somebody has effectively wiped the (device) of electronic information that as far as you’re aware they’re fully aware you wanted to look at.

“What view, if any, did you take about how suspicious that action was?”

Det Con Morgan replied: “I thought it was highly suspicious.

“It was quite clear why I wanted it.

“By wiping it, it put that data beyond use.

“Someone at the Biffa depot did this.”

Eastern Daily Press: Corrie McKeague was based at RAF Honington near Bury St EdmundsCorrie McKeague was based at RAF Honington near Bury St Edmunds (Image: Archant)

He added that police later learned that the data stored on the device would have been of “no evidential value to us” anyway, adding that it was “ludicrous” that somebody had performed a hard reset.

The correct bin weight, of 116kg, was provided by senior staff at Biffa after the firm’s IT experts examined raw data in the database.

The inquest heard that bin lorry driver Martyn Thompson was first spoken to by police on September 29, and the following day changes were made to Biffa’s front-end facing IT system Biffanet so users would see the weight as 11kg.

This did not alter the weights in the database underpinning it.

Det Con Morgan said two staff from the Biffa depot in Bury St Edmunds, who were not named, were interviewed under caution on suspicion of perverting the course of justice and were later told they faced no further action.

Bin lorry driver Mr Thompson was never a suspect in the investigation.

Mr Thompson had asked one of the individuals for “reassurance” about the bin weight when interviewed, one of Det Con Morgan said.

“When I interviewed one of the individuals, what they said was he (Mr Thompson) was having self-doubt about whether the bin was heavy enough,” said Det Con Morgan.

“He wanted reassurance the bin wasn’t heavy enough and he was given that reassurance.”

Mr Thompson earlier told the inquest he checked the bin and did not see anybody inside it.

The inquest previously heard the time taken for the bin lorry to enter and leave the service area was 51 seconds.

Det Con Morgan said that in 2018 officers filmed the bin lifting process on the lorry and recorded that it took 40 seconds from the bin being attached to the lorry to it being tipped and returned to the ground.

The inquest, being heard with a jury, continues.